Welcome to Jiangsu Lichao New Material Technology Co., Ltd.
What should be noted when storing stainless steel coils
source：m.inspcn.com | Release time：2026年03月23日1、 Storage environment control requirements
The storage environment is the core foundation for the storage of stainless steel coils. Adverse environments can directly break through the passivation film protection on the surface of stainless steel, causing irreversible quality problems. It is necessary to strictly control the environmental temperature, humidity, cleanliness, and surrounding media to eliminate the source of corrosion.
（1） Temperature and humidity hardness indicators
Priority should be given to using enclosed indoor dedicated warehouses for storage, and long-term outdoor stacking is strictly prohibited; The indoor ambient temperature should be controlled between 15 ℃ and 25 ℃ to avoid sudden temperature fluctuations and prevent condensation caused by large temperature differences. The water film formed by condensation is the main cause of white and yellow rust on stainless steel. Indoor relative humidity must be strictly controlled below 60%. Industrial dehumidifiers, exhaust fans, ventilation windows, and other equipment should be installed in areas with excessive humidity to maintain ventilation and dryness 24 hours a day. During the rainy season and high humidity coastal areas, dehumidification frequency should be increased and humidity data should be monitored in real time to avoid moisture accumulation.
（2） Corrosion prevention and cleanliness control
The storage area should be kept away from corrosive media such as acid, alkali, salt chemical reagents, electroplating workshops, printing and dyeing workshops, chemical raw material warehouses, seawater mist, salt alkali dust, etc. It is strictly prohibited to mix with carbon steel products, galvanized steel, hardware accessories, cement sand and gravel, paint coatings and other materials to prevent the migration of carbon and iron ions and the erosion of stainless steel surfaces by chemical volatiles. Maintain a high level of cleanliness in the warehouse, regularly clean dust, metal shavings, and debris to avoid scratches caused by hard particles adhering to the surface. At the same time, cutting, welding, painting, and other operations are prohibited in the warehouse to prevent sparks, welding slag, and paint mist from contaminating the surface of steel coils.
（3） Basic requirements for the venue
The storage floor should be a flat, hardened, non slip cement floor or wear-resistant floor, free of bumps, accumulated water, and sharp debris. The ground bearing capacity should meet the requirements for heavy-duty stacking of stainless steel coils to avoid ground settlement and imbalanced stacking; The warehouse needs to have complete rainproof, anti-seepage, and drainage functions to prevent rainwater and groundwater leakage from soaking steel coils. When storing temporarily outdoors, a rainproof shed must be built and the bottom must be treated with waterproof measures.
2、 Standard management of stacking and support
Unreasonable stacking can easily lead to deformation, looseness, compression damage, and end face collision of steel coils. It is necessary to follow the principles of "stability, layering, zoning, and height limitation", standardize the stacking method and support materials, and balance the utilization of storage space and material safety.
（1） Support pad isolation requirements
Stainless steel coils are strictly prohibited from coming into direct contact with hard and rough surfaces such as cement floors, steel plates, and bricks. Hard solid wood pads, rubber composite pads, engineering plastic trays, and specialized steel saddles must be used to elevate the coils, with a height of no less than 15cm, to ensure that the bottom is completely detached from the ground and to prevent moisture and impurities from coming into contact with the coils. The shims should be dry, free from mold, burrs, and exposed nails to avoid scratching the outer packaging and surface of the steel coils. The height of the shims for the same batch of steel coils should be consistent to ensure horizontal stacking.
（2） Stacking method and specifications
Stainless steel coils are divided into two types: vertical stacking and horizontal stacking, which can be flexibly selected according to storage space, steel coil specifications and weight: large-diameter and thick steel coils are prioritized for vertical storage, and special fixed brackets are required for vertical stacking to prevent rolling and tilting. The coil body should be kept vertical to avoid tilting and stress; Small diameter and thin specification steel coils can be stacked horizontally. It is strictly prohibited to stack multiple layers too high when stacking horizontally. For conventional thin coils (thickness 0.3-2mm), the stacking should not exceed 3 layers, and for thick coils (thickness ≥ 2mm), the stacking should not exceed 2 layers. The upper steel coil should be completely aligned with the center of the lower layer to prevent deformation and loosening caused by eccentric compression.
（3） Partition classification management
According to the material of the steel coil (304, 316, 201, 430, etc.), surface accuracy (2B, BA, mirror surface, No.1 industrial surface), specification thickness, and storage batch, it should be stored by zoning and marking with clear identification signs, indicating the material name, specification, batch number, and storage time to prevent mixing and stacking. Leave a minimum operating gap of 50cm between coils for easy inspection, handling, and ventilation. It is strictly prohibited to squeeze or collide adjacent steel coils, and it is forbidden to place heavy objects, tools, or other debris above the steel coils to prevent surface indentation and depression.
3、 Packaging and Rust Prevention Management
The stainless steel coil is packaged as the core protective layer, which can effectively isolate moisture, dust, and corrosive media. During the storage process, it is necessary to ensure the integrity of the packaging throughout the entire process and supplement protective measures according to the storage period to avoid direct surface exposure.
（1） Original packaging maintenance
It is strictly prohibited to dismantle or scratch the PE moisture-proof film, anti rust paper, wrapping film, steel strapping and other packaging at the factory. If the packaging is found to be damaged, cracked or detached during transportation or inspection, it should be immediately re wrapped and sealed with moisture-proof film or anti rust paper of the same specifications. The damaged parts should be reinforced to prevent moisture and dust from entering. The outer packaging steel strip should be kept tight to avoid loosening and causing the steel coil to become loose. If the strapping is loose, it should be re tied and fixed in a timely manner.
（2） Periodic rust prevention and protection
Short term storage (within 3 months): Keep the original factory packaging intact without additional protection, and focus on environmental moisture prevention; Mid term storage (3-12 months): In addition to the original packaging, an additional vapor phase rust proof film is wrapped and an appropriate amount of vapor phase rust inhibitor is placed to enhance moisture and rust resistance; Long term storage (more than 12 months): Adopting double-layer anti rust packaging, coated with special stainless steel anti rust oil on the surface, sealed with moisture-proof film on the outer layer, regularly checking the effectiveness of anti rust agents, and timely replacing ineffective protective materials.
（3） Special surface protection
Mirror, BA, 8K and other high gloss stainless steel coils have weak scratch resistance and pollution resistance. In addition to basic anti rust packaging, soft pearl cotton and non-woven fabric wrapping should be added. It is strictly prohibited to touch them with bare hands or hard objects. A dedicated storage area should be set up separately to avoid cross handling with ordinary industrial steel coils and prevent surface scratches, fingerprints, and color differences.
5、 Guidelines for Handling and Lifting Operations
Violation of handling and lifting regulations is the main cause of mechanical damage to stainless steel coils. The principle of "light lifting, smooth operation, and special tools" should be followed throughout the process to prevent violent operations and ensure the integrity of the appearance and structure of the steel coils.
（1） Selection of specialized lifting equipment
It is strictly prohibited to use steel wire ropes, iron chains, or hard fixtures to directly bind or clamp steel coils. Soft lifting devices such as nylon slings, polyurethane coated slings, and specialized clamps must be used. The width of the slings should not be less than 10cm to avoid local excessive force causing indentation and strangulation. The lifting devices must be kept clean, free of damage and oil stains, to prevent contamination of the surface of the steel coil.
（2） Standard operating procedures
Before lifting, check the firmness of the lifting equipment, confirm that the center of gravity of the steel coil is stable, and that the lifting, running, and falling process is smooth and slow throughout the entire process. Avoid sudden stops, sudden starts, shaking, and collisions, and strictly prohibit dragging or rolling the steel coil; When manually assisting in handling, operators must wear clean cotton gloves and are prohibited from touching the surface of the steel coil with bare hands to avoid rust caused by sweat and grease residue; Clear obstacles in advance along the transportation route to prevent collisions and scratches on the steel coils during the journey.
6、 Daily inspection and inventory control
（1） Regular inspection system
Establish a regular inspection mechanism, with at least one inspection per week, and increase the frequency to once every three days during rainy and high humidity seasons. The inspection contents include: packaging integrity, environmental temperature and humidity, whether steel coils have condensation, rust, discoloration, deformation, looseness, and end face collision, as well as the stability of wooden pads and stacking. Keep detailed inspection records and retain data for future reference. If slight water stains, mold spots, and floating rust are found, they should be immediately transferred to a dry area and gently wiped with a special stainless steel cleaning cloth. Analyze the cause of the problem and optimize environmental control.
（2） Inventory turnover control
Strictly follow the principle of inventory turnover, prioritize the distribution of steel coils with early storage time, avoid long-term material backlog, and reduce the risk of storage loss. Regularly conduct inventory checks, verify material specifications, quantities, and quality status, identify steel coils that are stored beyond their expiration date or have minor defects separately, prioritize their use, and avoid the expansion of quality problems.
prev:
How does stainless steel strip provide structural…
next:
How to improve the thermal conductivity of stainl…
【Related articles】
Jiangsu Lichao New Material Technology Co., Ltd.
+
WeChat ID:m.inspcn.com
WeChat ID:m.inspcn.com
Add WeChat
Contact us
The phone